American Fork Foundation Pros logoAmerican Fork Foundation ProsFoundation Repair · American Fork, UT
Driveway Lifting photo

American Fork Foundation Pros

Driveway Lifting in American Fork, UT

Polyurethane foam lifting for sunken American Fork, UT driveways, same-day results near the garage transition. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving American Fork and nearby communities.

A driveway sinking right at the garage transition is one of the most common calls American Fork Foundation Pros gets from newer subdivisions. Fill soil under the slab compacts over the first few years, and the driveway settles faster than the attached garage floor, leaving a noticeable step or trip hazard.

Polyjacking fixes that without replacing the slab. Foam goes in through small drilled holes, fills the gap left by the settled soil, and raises the driveway back to meet the garage floor.

What's included

What's included

Typically included: slab assessment, access hole drilling, foam injection, grade matching to the garage slab, hole patching. Optional: joint resealing along expansion joints disturbed during the lift. Customer prep: move vehicles off the driveway, clear the surface before the crew arrives.

How it works

How our Driveway Lifting process works

  1. Driveway Inspection photo
    Step 1

    Driveway Inspection

    Sunken or sloped sections are identified for correction.

  2. Access Drilling photo
    Step 2

    Access Drilling

    Small holes are drilled at strategic points along the driveway.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Expanding foam is pumped beneath the slab to raise it evenly.

  4. Slope Correction photo
    Step 4

    Slope Correction

    The surface is adjusted to restore proper drainage direction.

  5. Hole Sealing photo
    Step 5

    Hole Sealing

    Drilled holes are patched to blend with the existing surface.

  6. Surface Review photo
    Step 6

    Surface Review

    The driveway is inspected for even, stable elevation.

Materials

Materials and methods for Driveway Lifting

Driveways carry vehicle loads, so the lift material has to hold under weight without adding mass to the soil below.

  • Polyurethane Foam photo

    Polyurethane Foam

    lifts without adding excess weight to already-compacting fill soil, cures fast enough for same-day vehicle use.

  • Concrete Patch Mix photo

    Concrete Patch Mix

    seals access holes after injection work.

  • Joint Sealant photo

    Joint Sealant

    reseals expansion joints disturbed during the lifting process.

  • Surface Sealer photo

    Surface Sealer

    protects the driveway from moisture and future cracking.

  • Leveling Equipment photo

    Leveling Equipment

    ensures accurate measurement during the lift.

  • Bonding Primer photo

    Bonding Primer

    improves patch adhesion to the original concrete.

Timeline

How long does a Driveway Lifting take?

Most driveway lifts finish in a single visit.

  1. 01

    Consult and assessment

    same day
  2. 02

    Access drilling and foam injection

    same day
  3. 03

    Cure before vehicle use

    a few hours

  4. 04

    Hole patching and final review

    same day

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Driveway Lifting

Driveway lifting is low-impact work, but confirm with Utah County if your driveway borders a city easement.

Typically needs a permitOften no permit
None typically for standard residential driveway liftingPrivate driveway foam lifting

DIY vs pro

DIY vs hiring a pro for Driveway Lifting

DIYHire a pro
Sealing minor surface cracks with concrete caulkAny actual lifting, since uneven foam injection under a driveway can crack it further without proper pressure control
Watching a slight step develop over a season before deciding to actDriveways with a noticeable trip hazard at the garage transition
—Slabs supporting regular vehicle weight, where lift precision matters

When to call

When to call for Driveway Lifting

Call American Fork Foundation Pros for a free estimate.

  • A trip hazard at the garage-to-driveway transition
  • A visible gap or void under the slab edge
  • A driveway section noticeably lower than it was a year ago
  • Cracking developing along a settled section

Before & after

Before and after Driveway Lifting

  • Driveway Lifting photo
    Before
  • Driveway Lifting photo
    After

FAQs

Driveway Lifting FAQs

How much does it cost to lift a sunken driveway slab?

Most sections run $1,000 to $3,000 depending on square footage and sink depth. A free estimate gives the exact number for your driveway.

How long before I can drive on a lifted driveway?

Polyurethane foam cures within a few hours, so most driveways are ready for vehicle use the same day.

Will the driveway sink again after lifting?

Foam fills the existing void and doesn't add weight that compacts further soil. Most lifted driveways hold, barring new drainage issues.

Can I lift just part of my driveway?

Foam injection targets only the sunken sections. The rest of the slab stays untouched.

Is driveway lifting cheaper than replacement?

Typically 50-80% less than a full tear-out and repour.

Next step

Get a Driveway Lifting estimate in American Fork

Call American Fork Foundation Pros at +1 (385) 304-4835 or request a free estimate online.

Ask about Driveway Lifting

Tell us about the project and how to reach you.

Call (385) 304-4835